Cd Changer Operations; Playing Cds - JVC KD-LH2000R Instructions Manual

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series
with your unit.
If you have another JVC CD automatic changer,
consult your JVC IN-CAR ENTERTAINMENT
dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
"No Disc" will flash on the display. If this
happens, remove the magazine and set the
discs correctly.
• If "Reset 1" – "Reset 8" flashes on the display,
something is wrong with the connection
between this unit and the CD changer. If this
happens, check the connection and make sure
the cords are connected firmly. Then, press
the reset button of the CD changer.
44
"

Playing CDs

Select the CD automatic changer (CD-CH).
* If you have changed the "Ext Input" setting to
"Line In" (see page 38), you cannot select the
CD changer.
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
Current disc and track no.
Elapsed playing time
Note on One-Touch Operation:
When you press CD/CD-CH, the power automatically
turns on. You do not have to press
the power.
To change the information shown on the
display
Press DISP (D) repeatedly.
For details, see "Changing the display patten"
page 23.
Note:
If you change the source or turn off the unit, CD play
also stops.
Next time you select "CD-CH" as the source, CD play
starts from where playback has been stopped previously.
CD
CD-CH*
to turn on
on