JVC KD-LH2000R Instructions Manual page 38

To adjust the display contrast level
Contrast
You can adjust the display contrast level among 1
(dark) to 10 (bright).
To select the display illumination
pattern—LCD Type
You can select the display illumination patterns
according to your preference.
• Auto: Positive pattern will be selected
during the day time (while the
headlights are turned off); on the
other hand, negative pattern will be
used during the night time (while
the headlights are turned on.)
• Positive: Positive (normal) pattern of the display.
• Negative: Negative pattern of the display.
To select the font on the display—Font Type
You can change the font types used on the display.
Select either "1" or "2" according to your preference.
To turn the tag display on or
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
• On: Turns on the ID3 tag display while playing
MP3 files.
* If an MP3 file does not have ID3 tags,
directory name and file name appear.
Note:
If you change the setting from"Off" to "On"
while playing an MP3 file, the tag display will be
activated when the next file starts playing.
• Off: Turns off the ID3 tag display while playing
MP3 files. (Only the directory name and
file name can be shown.)
To change the FM tuner selectivity—
IF Filter
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard.
38
• Auto:
—
• Wide:
To turn on/off the key-touch tone—Beep
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
• On:
• Off:
To select the external component to use—
Ext Input
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
off—ID3 Tag
component—CD changer or external component
—to use.
• Changer:
• Line In:
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
To select the telephone muting—Telephone
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either "Muting 1" or "Muting 2," whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• Muting 1:
• Muting 2:
• Off:
When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
Subject to the interference from
adjacent stations, but sound quality will
not be degraded and the stereo effect
will not be lost.
Activates the key-touch tone.
Deactivates the key-touch tone.
To use the CD changer.
To use the external component other
than CD changer.
Selects this if this setting can mute
the sounds.
Selects this if this setting can mute
the sounds.
Cancels the telephone muting.