Function Settings - Panasonic CCQ-C5401W Operating Instructions Manual

E

Function Settings

N
G
L
I
S
H
25
PWR
SRC
SCROLL RANDOM
SQ
1 2 3 4
MUTE
Spectrum Analyzer Display Patterns
(PATTERN)
Default: Pattern 1
Variety: 6 types, OFF
Mute/Attenuation
You can select mute or attenuation. (a Page 9)
Default: MUTE
Security Function
You can activate the anti-theft function when leaving your car.
Default: ON
26
CQ-C5401W/C5301W
Turn [VOLUME]. (Press [8] ( ) or [0]
}
) on the remote control unit.)
(
{
Press and hold
TILT/OPEN
CQ-C5401W
[VOLUME] (PUSH
SEL: select) for more
than 2 seconds. (Press
BAND
APM
and hold [SEL]
(MENU) for more
SCAN REPEAT CLOCK
DISP
5 6
than 2 seconds on the
remote control unit.)
[DISP] (Return to the regular mode)
Press and hold [VOLUME]
(PUSH SEL) for more than 2
seconds to open the menu.
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Regular mode PATTERN
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to the regular mode.
Turn [VOLUME].
w q
Turn [VOLUME].
q
w
Turn [VOLUME].
q
w
When the ignition switch is turned OFF...
¡ The security message will be displayed.
¡ The face plate removal alarm will be active.
(a Page 28)
When the face plate is removed...
¡ The security indicator (SLED) blinks.
MUTE KEY SECURITY
: Off
: Pattern 1 (Default)
: Pattern 6
: 10 steps decrease (Attenuation)
: No sound (Mute) (Default)
: The security function is activated. (Default)
: The security function is not activated.
SLED (Security Light Emitted Diode) ON
(a Page 28)
CQ-C5401W/C5301W
E
N
G
L
I
S
H
26 1
27