Back Panel Connectors - Cisco Xfinity RNG150N User Manual

Back Panel Connectors

M-CARD SN: PKCPTMFDV
M-CARD MAC: 001BD746C7CB
1 2
1 Multi-Stream
CableCARD
2 M-Card Label
3 Bar Code Label
4 Cable In
5 Video Out
6 HDTV Component
Output (YPbPr)
7 Primary Stereo
RCA Output
8 Digital Audio Out
9 Optical Audio Out
10 IR
11 S-Video Out
12 HDMI
13 Ethernet
14 USB
15 1394
16 AC Power Input
Note: This illustration may vary from the actual product.
4
3 4 5
Installed by your service provider
Contains M-Card serial number and MAC address
Contains set-top serial number and MAC address
Connects to a coaxial cable that delivers the signal from your service provider
Connects to the composite input on your TV
Connects to the YPbPr inputs on an HDTV. Do not use these connectors if you are using
the HDMI connection
Connects to the RCA left\right audio input on an SDTV
Connects to the digital audio input of a surround sound receiver or other digital audio device
Connects to an optical cable that sends a digital audio signal to a surround-sound receiver
or other digital audio device
Available to be connected to an approved remote IR receiver (or to IR Blaster purchased
separately). Please contact your service provider for details
Connects to S-Video input of a standard TV or VCR
Connects an HDMI™ cable to the HDMI input of an HDTV. HDMI supports both digital audio
and video. May be used to connect to a DVI interface using an HDMI-to-DVI adapter for video
and separate audio connections. Any of the following audio connections may be used:
Primary Stereo RCA Output (7); Digital Audio Out (8); or Optical Audio Out (9)
Connects to an Ethernet network
Connects to external USB devices such as a keyboard or mouse
Connects to display devices equipped with a 1394 input
Connects to the power cord to deliver power to the set-top (50W max)
6 7 8 9 10 11 12 13 14 15 16
T13673