Panterra Fusion Service Manual page 33

30
2. Body Cover and Exhaust System
Body Cover Removal
1. Remove middle luggage
box after opening the seat
and removing the four lock
nuts.
2. Remove two center cover
screws.
3. Remove center cover.
4. Remove left and right
cover. (2-3)
5. Remove three rear-rack
screws.
6. Remove rear rack.
7. Remove screws in rear of
body panel.
8. Remove the two screws in
the front of the body
panel.
9. Disconnect seat lock lead.
10. Remove the removal
order for installation.
Make sure to connect
seat lock lead when
installing body cover.
MIDDLE LUGGAGE BOX
CENTER
COVER
6
LUGGAGE RACK
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
SEAT
1
3
5
7
2-3
CHAPTER 2: BODY COVER AND EXHAUST SYSTEM