Detaching The Left Crankcase Cover; Removing The Starting Pivot - Panterra Fusion Service Manual

98
9. Driving Belt Device & The Starting Lever
Detaching the Left
Crankcase Cover
1. Unlock the clip for the air
tube for the driving belt.
2. Remove eight bolts and then
take off the left crankcase cover
and the locating pin.
3. Check whether the gasket is
damaged or fractured.

Removing the Starting Pivot

1. Remove the starting lever
from the pivot.
2. Remove the retainer and the
washer from the starting pivot.
3. Turn the starting pivot gently
and remove the driving gear and
the friction spring together.
4. Remove the starting pivot
and the return spring.
5. Detach the starting pivot
sleeve.
CLIP OF THE AIR TUBE
1
STARTING PIVOT
1
WASHER
2
STARTING LEVER
3
STARTING
PIVOT GEAR
FRICTION
SPRING
9-3
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
2
RETURN
SPRING
CHAPTER 9: DRIVING BELT DEVICE & THE STARTING LEVER
4
STARTING
PIVOT