3-7. HOLDER ASSY
3-8. MOTOR FLEXIBLE BOARD
4 adhesive sheet
Note: Align a circular hole in the stripping paper
with a circular hole in the DC motor (sled),
when mounting the motor
flexible board.
4 Remove the holder assy to
direction of the arrow B.
1 Open the holder assy.
A
1 Remove four solders of
DC motor (sled) (M602).
2
B
3 boss
5 motor flexible board
2 Remove two solders of
DC motor (over write head up/down) (M603).
3 Remove four solders of
DC motor (spindle) (M601).
MZ-R501/R501PC
9