D-Link SecuriCam DCS-5300W Manual page 71

Using IP surveillance Software (continued)
Record & Schedule
Record –
Stop –
Scheduling –
Enable Scheduler –
settings.
P/T Control
Refer to the following figure to use the pan and tilt controls.
Tilt/navigate camer using arrows.
Pan – Pans the camera one full cycle.
Stop – Stops movement of the camera during pan.
Patrol – Enables the Auto Patrol feature.
Pull down menu –
DI/DO Control
Only one user with the administrator privilege can access the DI/DO control at
the same time. Refer to the following figure to control.
Digital Input is High
Set Digital Output to Low
Set Digital Output to High
Record the selected channel manually.
Stop recording the selected channel manually.
Arrange recording schedule
Return to home position.
Select a preset position to move the camera to.
Record according to the scheduler
71