Table of Contents
Advertisement
WARNING: Mower blades are sharp and can cut.
Wrap the blade(s) or wear gloves and use extra caution
when servicing them.
1. Attach the lower handle
nuts. Fig. 4-2
3
Fig. 4-2
2. Assemble the upper handle to the lower handle
Use the holder
on the right hand side and the two
13
bolts
on the left hand side and the flanged cap nuts
. Fig. 4-3 and Fig. 4-4
7
13
Upper handle
Fig. 4-3
Upper handle
7
Fig. 4-4
to the mower with flanged
6
3
9
3
3. Remove the lower bolt and attach the bar
mower as shown. Fig. 4-5. Start the bolt in the hole
but do not tighten. Install the bracket
handle and attach the bar
(flanged cap nut not shown). Tighten all of the hard-
ware. Fig. 4-5 and Fig. 4-6
Lower bolt
.
Lower handle
11
NOTE: When adjusting the height of the handle,
loosen the bolt on the bar
handle height adjustment bolt. Fix the cable harness to
the handle with velcro straps so that they do not inter-
fere with the opening / closing of the guard or opera-
tion of the machine. The cable harness should be
routed under the lower handle. Fig. 4-7 and Fig. 4-8
Loosen bolts to
adjust height
4-4
11
to the lower
using hardware
11
11
Fig. 4-5
10
8
Fig. 4-6
, before loosening the
11
Fig. 4-7
108548_0609
to the
and
Advertisement
Table of Contents
