Cable Connections - Evolution Digital DMS2004UHDS User Manual

1

Cable Connections

HDMI Connection è
2. Connect the HDMI cable to the
"HDMI" port on HD Set-Top Box and
HDMI allows you to take full advantage
the "HDMI" port on your HDTV.
of the Evolution Digital HD Set-Top Box
high-definition digital features. 3. Connect the power cord to the
electrical wall outlet and the "DC 5V
1. Connect a coaxial cable to the cable
IN" port on the HD Set-Top Box.
wall outlet and the "CABLE IN" port
on the cable box.
Note: HDMI cables carry audio and video to the TV.
To TV
SD Coaxial Audio/Video
CABLE IN
Connection ç
1. Connect a coaxial cable to the cable
wall outlet and the "CABLE IN" port on
the HD Set-Top Box.
2. Connect another coaxial cable to the
"RF OUT" port on the HD Set-Top
To Coaxial Wall Outlet
To Electrical Outlet
6
HDMI Set-up
To TV
HDMI (IN)
To TV
To Coaxial Wall Outlet
To Electrical Outlet
OR
Box. Connect the other end to the
input port on the TV.
3. Connect the power cord to the
electrical wall outlet and the "DC 5V
IN" port on the HD Set-Top Box.
Note: Make sure the channel 3/4 switch matches the
channel on your TV. For example, if your cable box is
set to "3", make sure your TV is on channel "3".
2
Why do I need to activate my HD Set-Top Box?
Activation essentially "turns on" your digital box in your home and on your cable provider's network.
Before you activate
1. Complete the Cable Connection steps
prior to activating.
2. Have the HD Set-Top Box Serial Number
available. This can be found on the bottom of
the HD Set-Top Box or on the side panel of the
product packaging.
3. Have your cable provider customer account
number accessible. This is typically found on
your cable provider billing information.
Now you are ready to activate!
4. Activate your HD STB by calling your cable
provider directly.
Note: Installation and activation will not impact your current
existing cable service.
Activation
7