Task #30 - Front Brake Bleeding
Warning!!!
•
Do not allow foreign material to enter the system when filling the reservoir.
•
Avoid spilling fluid on painted, plastic or rubber parts. cover these areas with a rag whenever the
system is serviced
•
Us only DOT 4 brake fluid from a sealed container
•
Do not mix different types of fluid as they are not compatible
Service Interval and Recommended Maintenance Manual
Brake Fluid Draining:
Turn the handlebar to the left until the reservoir is level.
Remove the screws, reservoir cover, set plate and
diaphragm.
Connect a tube to the Bleed Valve and put the other end
in a clean container.
Loosen the Bleed Valve and pump the brake lever until
no more fluid flows out of the Bleed Valve.
Honda VT750CD ACE
63