Dimplex TDS8515T Installation And Operation Manual

Purifire electric stove

Hide thumbs

Table Of Contents

PARTS AND SERVICE MANUAL

FOR

DIMPLEX PURIFIRE ELECTRIC STOVE

Model TDS8515T

Table of Contents

Summary of Contents for Dimplex TDS8515T

Page 1 PARTS AND SERVICE MANUAL DIMPLEX PURIFIRE ELECTRIC STOVE Model TDS8515T...
Page 2: Table Of Contents
TABLE OF CONTENTS OPERATION PAGE 2 PARTS DRAWING PAGE 5 PARTS LIST PAGE 6 UPPER LIGHT BULB REPLACEMENT PAGE 7 LOWER LIGHT BULB REPLACEMENT PAGE 8 FILTER REPLACEMENT PAGE 9 MAIN ON/OFF SWITCH REPLACEMENT PAGE 10 MANUAL SELECTION SWITCH REPLACEMENT PAGE 10 UPPER LIGHT ON/OFF SWITCH REPLACEMENT PAGE 10...
Page 3: Operation
It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. CAUTION If you need to continuously reset the heater, unplug the unit and call Dimplex technical support at 1-888-DIMPLEX (1-888-346-7539) Extension 4. NOTE The heater may emit a slight, harmless odor when first used.
Page 4 REMOTE CONTROL USAGE This stove is supplied with a radio frequency remote control. This remote control has a range of approximately 50 feet (15.25m), it does not have to be pointed at the fireplace and can pass through most obstacles (including walls). It is supplied with one of 243 independent frequencies to prevent interference with other units.
Page 5 MANUAL SELECTION SWITCH Operates the electric fireplace in the same manner as the remote control transmitter. Pressing the switch up (“ I ” position) has the same effect as the ON button on the remote control and pressing the switch down (“ II ” position) has the same effect as the OFF button of the remote control.
Page 6: Parts Drawing
TDS8515...
Page 7: Parts List
TDS8515 REPLACEMENT PARTS STOVE, ELECTRIC 23", PURIFIRE CATALOGUE NO. DS7420 PART NO. 69004712** MOD LEVEL: NONE MADE IN: CHINA REPLACEMENT PART REPLACEMENT PART NO. 1. LOG SET 0438200200RP 2. FOOT 0438210104RP 3. FLAME MOTOR 2000210100RP 4. HEATER ASSEMBLY 2000230100RP 5. THERMOSTAT 2300150100RP 6.
Page 8: Upper Light Bulb Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 9: Lower Light Bulb Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 10: Filter Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 11: Main On/Off Switch Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 12: Heater Assembly Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 13: Circuit Board Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 14: Flame Motor/Flame Rod Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 15: Power Cord Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 16: Thermostat Replacement
TDS8515T If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.

Dimplex TDS8515T Installation And Operation Manual

Table of Contents

Related Manuals for Dimplex TDS8515T

Summary of Contents for Dimplex TDS8515T

Table of Contents