Siemens Gigaset C470 IP Manual page 48

Functions during a call
Consultation call
During a call:
Press the display key.
§Ext.Call§
~
Enter a number or copy it from the directory and press
The number will be dialled via the fixed line connection.
Please note:
After a few seconds, the number selected for a consultation call is saved in the last number redial list.
You have the following options:
u
Toggling:
¤
Use q to toggle between the participants.
– End call with active participant:
u
Conference call:
– Call both participants: press the display key
– End the conference call (toggling): press display key
– End call with both participants: press the end call key a.
Accepting a waiting call
Precondition: Call waiting is activated (page 44).
Press the display key.
§Accept§
Or: if the caller's number is not transferred:
¢
Accept waiting call
§Options§
You have the option of toggling or holding a conference call.
Please note:
– Without CLIP, a waiting call is only announced with a signal tone.
– If the first call was an internal call, the internal connection is ended.
– An internal call waiting is shown on the display. You can neither accept the internal call nor reject
it.
Rejecting a waiting call
¢
Reject waiting call
§Options§
Further network services for fixed line networks
End Active Call.
§Options§
.
§Conf.§
Network services
.
§OK§
.
§EndConf§
45