Table of Contents
Advertisement
ADVANCED USAGE
This section of the user guide covers system settings for the Luminis AiO unit and template configuration / creation.
It should be noted that the following steps should only be performed by users with a good working knowledge of the
Luminis AiO application, as choosing the wrong options could cause Luminis AiO to stop functioning correctly.
Setup my Luminis AiO
Click the Setup My Luminis AiO button to change settings on your unit.
The IP address and version number displayed at the top of
the screen may be useful for troubleshooting and technical
support.
The Clients & Groups button is only used when this
Luminis AiO unit is configured in Network mode. Please
refer to Network Mode section of this user guide for more
details.
Click the Network Settings button to run the network
connection wizard for this unit. You can set the computer
name and workgroup. Contact your IT department for
further information on settings in this wizard.
14
Click the Screen Settings button to change the screen
saver, power management and screen resolution. The
screen saver should be disabled at all times and the
monitor should not be allowed to turn off as these settings
will prevent your customers from seeing content.
Advertisement
Table of Contents
