Using The Remote Controller (Rm-Rk50) - JVC LVT2095-001A Instruction Manual

Display window
1
(Bluetooth) indicator
2 MENU (menu) indicators—
(list menu)
3 Tr (track) indicator
4 Source display / Preset number / Track number /
Folder number
5 Status of Bluetooth device
(Device number, [P: 1 – 5]; signal strength,
[ : 0 – 3]* 2 ; battery reminder, [ : 0 – 3]*
6 ST (stereo) indicator
7 HD (HD Radio™ broadcast) indicator
You can change the display and button illumination (see page 31).

Using the remote controller (RM-RK50)

When you use the remote controller for the first time,
remove the insulation sheet.
Insulation sheet
For USA-California Only:
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Caution:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the battery.
6
8 HOLD (reception hold) indicator
9
(setting menu),
p Playback mode indicators—
q Disc/device information indicators
w Main display
*
2 ) 1
*
2
Before using the remote controller:
• Aim the remote controller directly at the remote
• DO NOT expose the remote sensor to bright light
Replacing the lithium coin battery (CR2025)
TAG (PSD reception) indicator
(repeat)
— (track/file), (folder)
Appears when another layer exists for the current
selection.
As the number increases, the signal/battery power
becomes stronger.
sensor on the unit.
(direct sunlight or artificial lighting).
Remote sensor
* 1
(random),