Capturing Video with AVID Xpress DV 3.5
1. Make sure the PYRO A/V
Link is already connected via
firewire to your computer.
2. Run AVID Xpress DV 3.5,
on the upper left part of
the screen you will see the
RECORD TOOL Window.
3. PYRO A/V Link should be
recognized as a GENERIC
DVDevice – NTSC (PAL if
your converting analog PAL
signals to DV)
4. If the PYRO A/V Link is not
detected, click on the button
illustrated below and click auto-
configure.
5. To start capture, click on the
RECORD Button
Generic DV Device
Using A/V Link with
AVID Xpress DV 3.5
Record
PYRO A/V LINK 57