Exporting Video From A Video Editor To An Analog Device - ADS PYRO A/V Link User Manual

Previewing Video in the Video Editing Software:
With most video editing software, the interface includes a video preview window.
In some cases you must select the Movie Capture Window (Adobe Premiere).
1.) Locate the software video Preview Window or Movie Capture Window.
2.) Once you have the video preview or capture window open click PLAY on
the video editing software preview window. This will send a signal to your
digital camcorder to enter PLAY mode and you will see and most likely
hear (depending on the software) your video playing on the computer.
3.) Click the RECORD button on the video editing software and you will begin
to record DV to your computer hard drive.
Device Control Note: Depending upon the video editing software,
there may be extra steps to select your camcorder as the 1394 device
to be used for capture. Once your camcorder is selected as the 1394
device, you can use software device control just as if you were directly
connected to the computers 1394 port (See video editing notes in
appendix).
Video Editor to an Analog Device
Now that you have captured and edited your video you might want to export it out
of your computer and on to tape so you can easily publish or share your video
production with friends, family or even paying customers!
1.) Connect a video cable from the RCA or S-VHS OUT jacks on the back of
the PYRO A/V Link and into an external video input (RCA or S-VHS) on
your VCR
Note: S-VHS provides higher quality video recording than an RCA
cable. S-VHS is recommended if your camcorder or VCR offers this
connection.
Exporting Video from a
PYRO A/V LINK 22