Fujitsu ETERNUS Server Connection Manual page 9

Chapter 1 Workflow
>
P3AM-4152-02ENZ0 ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux
(SUSE Linux Enterprise Server)
Install ETERNUSmgr and Set Up the ETERNUS Disk Storage System
If ETERNUSmgr is to be used, install it and set up the ETERNUS Disk storage system.
Refer
-
"Chapter 6 Installing and Setting Up ETERNUSmgr" (page 15)
-
"Chapter 7 Setting Up the ETERNUS Disk Storage Systems" (page 16)
-
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
Checking the setup and maintenance operations
•
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS Disk storage system
•
"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS
Disk Storage System Settings for ETERNUS2000"
•
"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS
Disk Storage System Settings for ETERNUS4000, ETERNUS8000"
Set the Server to Recognize the Logical Units
Set up the server so that it can recognize the ETERNUS Disk storage systems' LUN
(logical units).
Refer
-
"Chapter 8 ETERNUS Disk Storage System Logical Unit Recognition" (page 17)
Set Up and Check the device-mapper multipaths
If device-mapper multipathing is used, set up and check the device-mapper multipaths.
Refer
-
"Chapter 9 Setting Up and Checking the device-mapper multipath" (page 21)
9
Copyright 2010 FUJITSU LIMITED