Preface - Fujitsu ETERNUS Server Connection Manual

Preface

• Chapter 4 Notes
This describes issues that should be noted when connecting the ETERNUS Disk storage
systems and server.
• Chapter 5 Setting Up the Linux Server
This describes how to install and set up the Linux server.
• Chapter 6 Installing and Setting Up ETERNUSmgr
This describes how to install ETERNUSmgr.
• Chapter 7 Setting Up the ETERNUS Disk Storage Systems
This describes how to set up the ETERNUS Disk storage systems using ETERNUSmgr.
• Chapter 8 ETERNUS Disk Storage System Logical Unit Recognition
This describes how to recognize the ETERNUS Disk storage system LUNs from server.
• Chapter 9 Setting Up and Checking the device-mapper multipath
This describes how to set up and check the device-mapper multipath.
Safe Use of this Product
Using this manual
This manual contains important information to ensure the safe use of this product. Be sure to
thoroughly read and understand its contents before using the product. After reading, store this
manual in a safe place for future reference.
FUJITSU has made every effort to ensure the safety of the users and other personnel, and to
prevent property damage. When using this product, carefully follow the instructions described in
this manual.
Acknowledgments
• Linux is a trademark or registered trademark of Linus Torvalds in the USA and other
countries.
• SUSE is a registered trademark of SUSE Linux AG., a subsidiary of Novell, Inc.
• The company names, product names and service names mentioned in this document are
registered trademarks or trademarks of their respective companies.
P3AM-4152-02ENZ0 ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux
(SUSE Linux Enterprise Server)
4
Copyright 2010 FUJITSU LIMITED