Table of Contents
Advertisement
User's Manual
Feature
Default
Personality (*8)
Auto
Jam recovery (*9)
Off
PS error report (*9)
Off
Auto continue
Off
Acknowledge (*10)
Inside
I/O timeout (*11)
15
Parallel interface
LPT1
Serial interface
COM1
Top offset (*12)
0.0
Left offset (*12)
0.0
*1 Letter for USA and A4 for Europe
*2 This is for letter and portrait. It automatically changes depending
on paper size and page orientation.
*3 Tray 2 is displayed when the optional paper feeder is installed. MFF
is displayed when the optional multi-function feeder (MFF) is
installed. AUTO (Tray 1 not used), AUTO (Tray 2 not used),
AUTO (MFF not used), and AUTO (All Select) are displayed
collectively as AUTO when above options are not installed.
*4 Duplex mode and binding are invalid for this printer.
*5 Font source is subordinate to the typeface and cannot be selected.
*6 The screen format changes depending on font information (except
for resident fonts) and compatible mode setting.
*7 FEIT is the acronym for Fujitsu Enhanced Image Technology that
makes the contours of objects appear smoother than with this
printer's resolution normally possible.
*8 The screen format changes depending on personality setting.
*9 Jam recovery and PS error report are valid when the optional FPS
card (PostScript level 2 compatible emulation card) is installed.
*10 This is for the Centronics parallel interface.
*11 This is essential for sharing the printer among multiple computers.
*12 Effective when PCL is selected for the personality. These values are
used as defaults of top and left offset specifications in PCL mode.
Remote Setup Utility Program, PPMENU
Other options or range
PCL, PS
On
On
On
Outside
15 to 300 seconds
LPT2, LPT3
COM2
-25.0 to +25.0 mm (0.1 mm steps)
-25.0 to +25.0 mm (0.1 mm steps)
PRINTER
SOFTWARE
2-5
Advertisement
Table of Contents
