Table of Contents
Advertisement
Setting Up
1-12
Notice:
You cannot install the paper tray with the pressure plate raised.
q
Notice:
If the paper guide is not in the locked position, the printer will not work.
8. Arrange paper edges. Rock
the paper tray to gather the
edges of the stack together to
ensure correct positioning of
paper in the tray.
9. Install the paper tray. Align
the sides of the tray with the
guide grooves of the tray slot
(the left groove is engraved
with a arrow) and firmly slide
the tray all the way into the
slot.
Guide
10.Remove the protective
material from the rear
stacker. Open the rear stacker
and remove restraint cushion
q. Make sure the paper
guide is pushed down in the
locked position. Close the
rear stacker.
User's Manual
Advertisement
Table of Contents
