Deactivating or stopping the alarm
I
Perform one of the following to deactivate or stop the alarm:
G Unlock the doors using the "keyless access" entry function.
G Unlock the doors using the remote keyless entry system.
G Turn the push-button ignition switch to "ACC" or "ON" mode,
or start the engine. (The alarm will be deactivated or stopped
after a few seconds.)
Activating/deactivating the alarm system
Check that both side doors and the trunk lid are closed.
STEP
1
Turn the push-button ignition switch to "ON" mode.
STEP
2
STEP
3
Alarm status
Deactivated
Activated
Open the driver' s door while
pressing and holding
the power door lock switch and
continue to press
approximately 10 seconds after
the driver' s door has opened.
The
between activated and deacti-
vated as follows.
Horn
Sounds twice
Sounds once
1-6. Security system
alarm
system
Multi-information dis-
play
AL oF
AL on
1
on
for
changes
83