Turning Off Both Trac And Vehicle Stability Control (Vsc) Systems; Automatic Deactivation Of Vehicle Stability Control (Vsc) Sport Mode - Subaru 2014 BRZ Owner's Manual

Turning off both TRAC and Vehicle stability control (VSC) systems

I
To turn the TRAC and Vehicle stability control (VSC) systems off, press and
hold for more than 3 seconds while the vehicle is stopped.
The Traction Control System OFF indicator light and the Vehicle stability
control (VSC) off indicator light will come on.
In this case, the brake LSD function remains on.
Press the button again to turn the systems back on.
Automatic reactivation of TRAC and Vehicle stability control (VSC) sys-
I
tems
After turning the TRAC and Vehicle stability control (VSC) systems off, the
systems will be automatically reactivated in the following situations:
Vehicles without a keyless access with push button start system: When
G
the engine switch is turned to “"LOCK”" position
Vehicles with a keyless access with push button start system: When the
G
push-button ignition switch is turned off
If only the TRAC system is turned off, the TRAC will turn on when vehicle
G
speed is more than approximately 31 mph (50 km/h).
If both the TRAC and Vehicle stability control (VSC) systems are turned
off, automatic reactivation will not occur when vehicle speed increases.

Automatic deactivation of Vehicle stability control (VSC) SPORT mode

I
Vehicles without a keyless access with push button start system
When the engine switch is turned to “"LOCK”" position after driving in Vehicle
stability control (VSC) SPORT mode, the mode is automatically deactivated.
Vehicles with a keyless access with push button start system
When the push-button ignition switch is turned off after driving in Vehicle sta-
bility control (VSC) SPORT mode, the mode is automatically deactivated.
Sounds and vibrations caused by the ABS, brake assist, TRAC and
I
Vehicle stability control (VSC) systems
A sound may be heard from the engine compartment when the brake
G
pedal is depressed repeatedly, when the engine is started or just after the
vehicle begins to move. This sound does not indicate that a malfunction
has occurred in any of these systems.
2-4. Using other driving systems
2
221