Tire Terminology And Definitions - Dodge 2014 Charger Owner's Manual

450 STARTING AND OPERATING

Tire Terminology And Definitions

Term
B-Pillar
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation Pressure
Tire Placard
The vehicle B-Pillar is the structural member of the body lo-
cated behind the front door.
Cold tire inflation pressure is defined as the tire pressure after
the vehicle has not been driven for at least 3 hours, or driven
less than 1 mile (1.6 km) after sitting for a three hour period.
Inflation pressure is measured in units of PSI (pounds per
square inch) or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible
cold tire inflation pressure for this tire. The maximum inflation
pressure is molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pres-
sure as shown on the tire placard.
A paper label permanently attached to the vehicle describing
the vehicle's loading capacity, the original equipment tire sizes
and the recommended cold tire inflation pressures.
Definition