Clutch Shoe/Movable Driven Face - Suzuki AN400 Service Manual

3-44 ENGINE
• Install the oil seal 4.
$
Replace the oil seal with a new one.
• Install the movable drive face cover 5.
• Install the spacer 6.
$
Press down the movable drive face plate so as not to
cause the roller to come out of the position when
inserting the spacer.

CLUTCH SHOE/MOVABLE DRIVEN FACE

DISASSEMBLY
• Hold the clutch shoe with the special tool and loosen the
clutch shoe nut 1.
$
Do not remove the clutch shoe nut before attaching
the clutch spring compressor.
% 09940-92440: Wrench set
09930-40131: Attachment
09930-40113: Roter holder
• Attach the special tool to the clutch shoe/movable driven face
assembly and compress the clutch shoe/movable driven face
assembly by turning in the special tool handle.
• Remove the clutch shoe nut 2.
% 09922-31420: Clutch spring compressor
$
Since a high spring force applies to the clutch shoe
assembly, care must be used so as not to cause the
clutch shoe assembly and movable driven face to
come off abruptly.