Gigaset C 100 User Manual page 12

Dect handset
Table of Contents

Advertisement

Placing the handset into the base and charging the batteries
When you place the handset into the base, the handset will register automatically to
the base. Proceed step by step as follows:
1. Place the handset in the base with the display up.
2. Wait till the handset has registered automatically to the base (page 55): This opera-
tion takes around one minute. While registration is in progress the screen displays
Registering and Base 1 flashes. After registration, you will see a '1' in the top left
of the display – this means that the handset has been assigned the first internal
number.
3. Now leave the handset in the base for the batteries to charge – the batteries are sup-
plied uncharged. Battery charging is indicated in the top right of the display by the
=
battery icon
=
Batteries flat
e
1
Batteries
Should automatic registration be interrupted, register the handset manually as
described starting on page 56. You can get help from a table containing basic questions
and answers (page 72).
i
To register additional handsets , refer to page 56.
For the initial charge we recommend a continuous, uninterrupted charg-
W
ing period of five hours, whatever charge status is indicated. After a while
the charge capacity of the batteries will decrease for technical reasons.
The battery charging status is correctly displayed only after uninterrupted charging/
discharging . You should therefore avoid removing the batteries unnecessarily and end-
ing the charging process prematurely.
Once initial charging is complete, you can replace your handset in the
N
base after each call. Charging is controlled electronically. This ensures
i
that the batteries are charged in a way that optimizes their life.
The batteries heat up during charging. This is normal and not danger-
N
ous.
Note
Your telephone is now ready for operation. With the Gigaset C 150, the answering
machine with pre-recorded announcement is also activated. To correctly record the time
of calls and messages (C 150) you should now set the date and time (page 14).
flashing:
/
charged
3
Preparing to use your phone
V
2
Batteries
/
charged
3
U
Batt. fully charged
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset c 150C 100C 150

Table of Contents