Table of Contents
Advertisement
Music Port
POWER
1
NV-MPS4 and MPS4-E Music Port Front Panel Features
1. Power: This button supplies power to the Music Port when the unit is plugged into an AC power source and the button is pushed. The
associated blue LED will light.
2.
USB Port:
This USB port is for use by NuVo Technical Support.
3.
NuVoNet Error LED:
The Music Port is designed to communicate via a CAT5 cable to the NuVo Essentia, Grand Concerto, and Renovia
Distributed Audio Systems. This red LED is designed to light indicating a lack of communication. With normal communication, it will remain unlit.
4.
LAN Error LED :
This red LED will light when there is no Local Area Network signal present at the RJ45
panel, or when there is an interruption in the LAN signal. See page 8,
different error states.
In normal operation it will remain unlit.
5.
RS232 Error LED:
This red LED will light when the Music Port does not detect a serial connection at its DB9 output on the back panel.
When a serial connection is present and active, the LED will remain unlit.
6.
HDD Status LED:
This green LED will light when the Music Port's hard drive is active.
7.
Source Address LED's:
These green LED's 1 - 6 will light indicating the assigned source inputs on the associated NuVo Distributed Audio System.
8.
Reset Button:
This recessed button will reset the Music Port's operating system when it is pushed.
RS232
2
3
4
5
6
7
8
Understanding the LAN Error LED, for a detailed description of the
4
port on the Music Port back
Ethernet
Hide quick links:
Advertisement
Table of Contents
