Rear Bumper - Subaru 2003 LEGACY BODY SECTION Service Manual

EXTERIOR/INTERIOR TRIM

5. Rear Bumper

A: REMOVAL
1. SEDAN
1) Lift-up the vehicle.
2) Remove bolts and clips.
3) Loosen clips to remove trunk rear trim.
4) Remove hook (A) to pull off rear side of trunk
side trim.
( A )
REAR BUMPER
5) Remove two nuts from each side to remove rear
bumper.
6) Loosen clips to remove upper beam (A) from
bumper face.
2. WAGON
EI-00137
1) Lift-up the vehicle.
2) Remove bolts and clips.
EI-00138
3) Remove rear floor box. <Ref. to EI-40, Remov-
EI-00139
al.>
EI-20
EI-00140
( A )
( B )
EI-00141
EI-00143