Replacing The Batteries - Mira Vision Dual User Manual

REPLACING THE BATTERIES

Change the batteries when the low battery
symbol is displayed.
To access the batteries, the controller must
be removed from the wall.
Press button to release and remove
the controller from the wall.
Make sure the controller is dry before
removing the battery cover. Turn unit
over to remove the battery cover by
loosening the screws with a pozi
drive screwdriver.
Note! The screws remain attached
to the battery lid.
Only fit new batteries of same make
and type. Do not use rechargeable
batteries. Replace all three
batteries at the same time.
When refitting the battery cover,
make sure the blue seal is clean
of dirt and debris. Make sure the
cover is secured firmly, but do not
overtighten the screws.
Hook controller on top of bracket and
push firmly until controller "clicks"
back into place.
If necesary, test shower to see if
functions are working as expected.
28