Roadrunner Installation Guide - Apollo Roadrunner Installation Manual

RoadRunner Installation Guide

IRAS Software Installation on Computer: Part 1
1. After installing software on laptop or PC this icon will
appear on the desktop. Double click the icon to open
the RAS Admin Screen.
2. Click on the small the computer monitor icon
located at the top left of the screen.
3. Click on the Add button to open the Add
Site Screen.
4. Assign a site name (usually the vehicle number)
5. Enter the DVR's default IP Address: 192.168.1.129
6. Unit ID is not required
7. Enter the default password: 12345678
8. Confirm the password
9. Click on the OK button to close the Add Site screen
10.Click the next OK button to close the Setup-Admin screen
Apollo Video Technology
1331-118th Ave SE, Ste 300 - Bellevue, WA 98005
Tel: 425.453.0430 / Fax: 425.453.0959
www.avt-usa.com
Page 12