To The Owner; To The Installer - Amana GUI Installation Instructions Manual

Gas fired warm air furnace
Table of Contents

Advertisement

WARNING
If the information in these instructions is
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
—Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
—What to do if you smell gas:
• Do not try to light any appliance.
• Do not touch any electrical switch;
do not use any phone in your build-
ing.
• Immediately call your gas supplier
from a neighbor's phone. Follow
the gas supplier's instructions.
• If you cannot reach your gas sup-
plier, call the fire department.
—Installation and service must be per-
formed by a qualified installer, service
agency or the gas supplier.
WARNING
Should overheating occur or the gas
supply fail to shut off, turn off the man-
ual gas control valve to the furnace be-
fore shutting off the electrical supply.

To The Owner

It is important that you fill out the owner's registration
card and mail it today. This will assist Amana in con-
tacting you should any service or warranty information
change in the future. When filling in the registration card,
be sure to include the Model, Manufacturing and Serial
Numbers, plus the installation date.
Your warranty certificate is also supplied with the unit.
Read the warranty carefully and note what is covered.
Keep the warranty certificate in a safe place, so you can
find it, if necessary.
If additional operating instructions are required, call the
dealer where the purchase was made.

To The Installer

Before installing this unit, please read this manual to
familiarize yourself on the specific items which must be
adhered to, such as maximum external static pressure
to unit, air temperature rise, minimum or maximum
CFM, motor speed connections, and venting. These
furnaces are designed for Category I venting only.
WARNING
To prevent possible death or personal
injury due to asphyxiation, Amana Non-
Condensing Gas Fired Warm Air Fur-
naces must be Category I vented. Do not
vent any of these furnaces using Cat-
egory III venting.
Keep this literature in a safe place for fu-
ture reference.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

GciGui seriesGci series

Table of Contents