JVC GET0638-001A Instruction Manual page 39

Symptom
The unit does not make pairing
with the Bluetooth device.
Echo or noise occurs.
Phone sound quality is poor.
The sound is interrupted or
skipped during playback of a
Bluetooth audio device.
The connected audio device
cannot be controlled.
Sound quality changes when
receiving HD Radio stations.
No sound can be heard.
"RESET 8" appears on the
display.
Remedy/Cause
• Enter the same PIN code for both the unit and target
device.
• Select the device name from "SPECIAL," then try to
connect again. ( 12)
• Try to pair/connect from the Bluetooth device.
Adjust the microphone unit position.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio device.
• Disconnect the device connected for "BT-PHONE."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again.
Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).
Fix the reception mode either to <DIGITAL> or
<ANALOG>. ( 17, 26)
• <ANALOG> is selected when receiving all digital
broadcast of HD Radio station. Select <DIGITAL> or
<AUTO>. ( 17, 26)
• <DIGITAL> is selected when receiving weak digital
signals or receiving conventional radio broadcast.
Select <ANALOG> or <AUTO>. (
Reconnect this unit and the HD Radio tuner box
correctly, then reset the unit.
17, 26)
ENGLISH 39