InSinkErator Food Waste Disposer Installation, Care & Use Manual

Slotted Screwdriver, Adjustable Pliers,
Plumber's Putty, Electrical Tape
Phillips Screwdriver, Drain Auger, 3/8" Electrical
Clamp Connector, Wire Nuts (2), Second 1 1/2" Drain
Trap, Hammer, Hacksaw, Water Hose Clamp, Pipe
Wrench, Copper Ground Wire, Dishwasher Drain
Connection Kit, Air Gap, Electrical On/Off Switch,
Drain Tube Extension
A: Stopper
B: Sink Flange
C: Fiber Gasket
D: Backup Ring
E: Mounting Ring
F: Screws (3)
G: Snap Ring
potential hazards or unsafe practices which could
result in serious personal injury or death.
hazards or unsafe practices which may result in
minor personal injury or property damage.
www.insinkerator.com
H: Mounting Gasket/Splash Baffle
I: Lower Mounting Ring
J: Dishwasher Inlet
K: Discharge Outlet
L: Wrenchette
M:Removeable Sound Baffle
The warning symbol alerts you to
The caution symbol alerts you to
Read through the entire Installation, Care & Use
manual before installing the disposer. Determine which of the
tools, materials, and accessories you will need before you begin.
Make sure you have all necessary disposer parts before installing
the disposer.Read through the entire Installation, Care & Use
manual before installing the disposer. Determine which of the
tools, materials, and accessories you will need before you begin.
Make sure you have all necessary disposer parts before installing
the disposer.
H
(optional)
#1
OR
#2
Discharge Assembly #1
N: Nut
O: Beveled Discharge Tube
(1-1/2" Diam.)
P: Beveled Washer
Q: Flanged Gasket
OR
Discharge Assembly #2
O: Discharge Tube/Gasket
(1-1/2" Diam.)
R: Flange
S: Screw