Connecting A Cassette, Cdr, Minidisc, Or Dat Recorder; Connecting The Power Cord Of Another Component - Onkyo HT-S780 Instruction Manual

Connecting Your Components

Connecting a Cassette, CDR, MiniDisc, or DAT Recorder

Step 1:
Choose a connection type ( ,
Connect one
or the other
• With the basic
• To connect the recorder digitally for playback purposes, use connections
Connection
a
b
c

Connecting the Power Cord of Another Component

The AV receiver has an AC outlet on its rear panel for
connecting the power cord of another AV component.
The other component's power switch can then be left in
the ON position so that it turns on or off when the AV
receiver is set to On or Standby.
Caution:
• Make sure that the capacity of the component that
you connect to the AC OUTLET does not exceed
the stated capacity (e.g., 100 W).
Notes:
• Onkyo components with
nected directly to wall outlets, not the AV
receiver's AC OUTLET.
• The socket type and capacity will depend on the
country in which you purchased the AV receiver.
30
, or ) that matches the recorder, and then make the connection.
a b c
b
DIGITAL IN
COAXIAL
c
OPTICAL
3
COAXIAL
OUT
OPTICAL
OUT
connection, you can play and record with the recorder, and listen via speaker set B.
a
HT-R530
TAPE IN L/R
TAPE OUT L/R
DIGITAL IN COAXIAL
DIGITAL IN OPTICAL 3
jacks should be con-
Cassette recorder, CDR,
etc.
Signal flow Cassette/CDR/MD/DAT recorder
⇐
⇒
⇐
⇐
American model
a
OUT IN
L
R
TAPE
L L
R R
IN OUT
REC PLAY
and or and .
a b a c
Analog audio L/R output
Analog audio L/R input
Digital coaxial output
Digital optical output