C
ONFIGURING THE
RIP Parameter
The device supports RIP v1 and v2 to dynamically exchange routing
information with adjacent routers.
Parameter
General RIP Parameters
RIP mode
Auto summary
Table of current Interface RIP
parameter
Interface
Operation Mode
4-36
V
IP ADSL R
O
Description
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will
include sub-network information from all sub-
networks connected to the ADLS Router. If
enabled, this sub-network information will be
summarized to one piece of information covering
all sub-networks.
The WAN interface to be configured.
Disable: RIP disabled on this interface.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates its
route table. It does not participate in sending route
broadcasts.
OUTER