Table of Contents
Advertisement
C
ONFIGURING THE
Parameter
Encapsulation
QoS Class
PCR/SCR/MBS QoS Parameters - PCR (Peak Cell Rate), SCR (Sustainable Cell
IP assigned by
ISP
IP Address
Subnet Mask
Connect Type
Idle Time
(minutes)
Username
Password
Confirm
Password
MTU
4-24
V
IP ADSL R
O
Description
Shows the packet encapsulation type.
Packet encapsulation specifies how to handle multiple
protocols at the ATM transport layer.
•
VC-MUX: Point-to-Point Protocol over ATM Virtual
Circuit Multiplexer (null encapsulation) allows only one
protocol running per virtual circuit with less overhead.
•
LLC: Point-to-Point Protocol over ATM Logical Link
Control allows multiple protocols running over one
virtual circuit (using slightly more overhead).
ATM QoS classes including CBR, UBR and VBR.
Rate) and MBS (Maximum Burst Size) are configurable.
Select Yes if the IP address was provided by your ISP.
If your IP address is assigned by the ISP each time you
connect, leave this field all zeros. Otherwise, enter your ISP
supplied static IP address here.
If your subnet mask is assigned by the ISP each time you
connect, leave this field all zeros. Otherwise, enter your subnet
mask here.
Sets connection mode to always connected, automatic or
manual connection.
Enter the maximum idle time for the Internet connection.
After this time has been exceeded the connection will be
terminated.
Enter user name.
Enter password.
Confirm password.
Leave the Maximum Transmission Unit (MTU) at the default
value (1500) unless you have a particular reason to change it.
OUTER
Advertisement
Table of Contents
