Installation Options - Russound ST1 smart tuner Installation Manual

The ST1 can be set on a shelf or by using the supplied brackets it can be
mounted in an A/V equipment rack, or surface-mounted. Its 1U high and ½
rack width size permits two units to be mounted alongside one another in a
single rack unit space.
Wall Mounting
The ST1 comes with two small rack ears with attachment screws that can be
used as wall mounting brackets. There are two attachment locations on each
side of the ST1 for more mounting options.
Rack Mounting
The rack mounting ears support either one or two ST1 units in a single rack
space. To install one ST1 in a rack space, use the long ear and one of the short
rack ears. The unit can be mounted either to the left or right side of the rack
space. For two units in one rack space, use the fl at plate provided on the bottom
of the adjoining chassis to support and connect them, and use one small rack
ear on each outer side of the combined unit assembly. When using the two-
unit mounting option, the small side ventilation slots on the ST1 units will
be next to one another in the middle of the rack space. To avoid overheating
situations, make sure the top panel ventilation holes are not blocked.
Russound ST1 Installation Manual

INSTALLATION OPTIONS

Wall mounting option
Single unit rack mounting option
Dual unit rack mounting option
7