Step 1: Before Setting Up; Step 2: Installing The Print Server - Lexmark MarkNet N8050 Setup Manual

Windows

Step 1: Before setting up

Before setting up your wireless print server, make sure the printer has been set up correctly.
• The toner or print cartridges are installed.
• Paper is loaded.
• Your printer is powered off and the power cord is unplugged from the wall receptacle.
• Your printer is ready to be installed.
About the setup process
Read all instructions before proceeding with setup.
Before the printer can be connected to your wireless network, the print server must first be installed in the printer and
configured for use on the network.
Note: See the User's Guide on the MarkNet N8050 Utilities CD for alternate setup information.

Step 2: Installing the print server

Installing the internal wireless print server option card may vary depending on the printer. See the printer
documentation, publications CD, or Web site for instructions on installing option cards.
CAUTION: Make sure the printer is powered off and the power cord is unplugged before installing the wireless print
server option card.
Windows
1