Section 4: Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for
monitoring. After making any changes, click the Save Settings button to save your changes.
Enable Video
Select this box to enable the motion detection
Motion:
feature of your camera.
Sensitivity:
Specifies the measurable difference between two
sequential images that would indicate motion.
Please enter a value between 0 and 100.
Percentage:
Specifies the amount of motion in the window
being monitored that is required to initiate an alert.
If this is set to 100%, motion is detected within the
whole window will trigger a snapshot.
D-Link DCS-6004L/DCS-6005L User Manual
Motion Detection
35