Protecting The Environment - Black & Decker Dustbuster V1250 User Manual

Switch off and unplug the appliance/
u
tool.
Or switch off and remove the battery
u
from the appliance/tool if the appliance/
tool has a separate battery pack.
Or run the battery down completely
u
if it is integral and then switch off.
Unplug the charger before cleaning it.
u
Your charger does not require any
maintenance apart from regular
cleaning.
Regularly clean the ventilation slots
u
in your tool using a soft brush or dry
cloth.
Regularly clean the motor housing
u
using a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Regularly open the chuck and tap it
u
to remove any dust from the interior
(when fitted).

Protecting the environment

Z
Separate collection. This product
must not be disposed of with
normal household waste.
Should you find one day that your
Black & Decker product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
z
separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
8
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local Black & Decker office at the address
indicated in this manual. Alternatively,
a list of authorised Black & Decker repair
agents and full details of our after-sales
service and contacts are available on the
Internet at: www.2helpU.com
Battery (fig. H)
Z
Black & Decker batteries can
be recharged many times.
At the end of their useful life,
discard batteries with due care
for our environment.
If you want to dispose of the product
yourself, the battery must be removed
as described below and disposed of in
accordance with local regulations.
Discharge the battery by operating
u
the appliance until the motor stops.
The battery is located under the back
end of the appliance.
Remove the crevice tool from the
u
accessory holder.
Push the slider (12) towards the front
u
of the product.
Remove the accessory holder.
u
Strike the product on a firm and stable
u
surface as shown in fig. H to dislodge
the battery.
Place the battery in suitable packaging
u
to ensure that the terminals cannot
be short-circuited.
Take the battery to your service agent
u
or a local recycling station.
Warning! Once removed, the battery
cannot be refitted.