Panasonic Viera X50D series Operating Instructions Manual page 60

Speaker control [Speaker Selection]
You can control the theatre speaker with this TV remote control pointing at the TV's signal receiver.
● If you cannot operate, check the settings and the equipment.
"Summary of features" (p. 53, 54), "Preparations" (p. 55)
Display [VIERA Link Menu]
1
● You can also access directly by using VIERA TOOLS (except: X50D series)
Select [Speaker Selection]
2
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Set to [Home Cinema] or [TV]
3
set
[Home Cinema]:
The sound is from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned
on if it is in Standby mode.
●
Volume up / down
VOL
●
Mute
MUTE
●
The sound of TV speakers is mute.
● When the equipment is turned off, TV speakers will be active.
[TV]:
TV speakers are active.
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect it with HDMI cable
(p. 54), and then select [Home Cinema]. In this case, you need to use an Amplifier which has "HDAVI Control 5"
function, and connect it to the TV's HDMI2 terminal via an HDMI cable.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from the DIGA Recorder
to the Amplifier (p. 54).
Note
●
These functions may not work properly depending on the connected equipment.
●
Image or sound may not be available for the first few seconds when input mode is switched.
●
"HDAVI Control 5" is the newest standard (as of December, 2011) for HDAVI Control compatible equipment. This
standard is compatible with conventional HDAVI equipment.
●
To confirm this TV's version of HDAVI Control
"How to Use VIERA TOOLS" (p. 23)
Start
Start
Recorder
Home Cinema
[System Information] (p. 29)
select
59