JVC KV-MRD900 Instructions Manual page 30

9-inch widescreen monitor with dvd player

Hide thumbs Also See for KV-MRD900:

Table of Contents

AUDIO menu

Item

DIGITAL AUDIO OUTPUT

DOWN MIX

D. (Dynamic) RANGE

COMPRESSION

Select the signal format to be emitted through the DIGITAL OUT

(Optical) terminal. For details, see page 36.

• PCM ONLY : Select this when connecting an amplifier or a

decoder incompatible with Dolby Digital, DTS, MPEG Audio, or

connecting to a recording device.

• DOLBY DIGITAL/PCM : Select this when connecting an

amplifier or a decoder compatible with Dolby Digital.

• STREAM/PCM : Select this when connecting an amplifier or a

decoder compatible with Dolby Digital, DTS, or MPEG Audio.

When playing back a multi-channel DVD disc, this setting affects

the signals reproduced through the analog terminals—AV-OUT and

cordless headphones (and through the DIGITAL OUT terminal when

"PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT").

• DOLBY SURROUND : Select this when you want to enjoy multi-

channel surround audio by connecting an amplifier compatible with

Dolby Surround to this monitor.

• STEREO : Normally select this.

You can enjoy a powerful sound at low or middle volume levels while

playing a Dolby Digital software.

• AUTO : Select this to apply the effect to multi-channel encoded

software (excluding 1-channel and 2-channel software).

• ON : Select this to always use this function.

Contents

Table of Contents