Deactivating/Activating - Mercedes-Benz SLK Operator's Manual

the brake system requires this.
R
the temperature in the vehicle interior
R
deviates from the set range.
the system detects moisture on the
R
windshield when the air-conditioning
system is switched on.
the charge level of the battery is too low.
R
Vehicles with manual transmission
! Only engage gear when the clutch pedal
is depressed.
The engine is started automatically if you:
fully depress the clutch pedal.
R
depress the accelerator pedal.
R
Vehicles with automatic transmission
The engine is started automatically if you:
release the brake pedal when HOLD is not
R
activated and the transmission is in
position D or N.
depress the accelerator pedal.
R
move the transmission out of position P.
R
i
Shifting the transmission to position P
does not start the engine.
i
If you shift the transmission from R to D,
the ECO start/stop function is available
again once the ¤ symbol reappears in
green in the multifunction display.
Deactivating/activating the ECO start/
stop function
ECO button
Deactivating (except for AMG vehicles)
Press button :.
X
Indicator lamp ; and the ¤ symbol in
the multifunction display go out.
Activating (except for AMG vehicles)
Press button :.
X
Indicator lamp ; lights up.
If all conditions for automatic engine
switch-off (
¤ symbol is shown in green in the
multifunction display.
If not all conditions for automatic engine
switch-off (
¤ symbol is shown in yellow in the
multifunction display. If this is the case, the
ECO start/stop function is not available.
Deactivating (AMG vehicles)
Press button : in drive program C.
X
or
Switch to drive program S or M
X
( page 151).
Y
Indicator lamp ; and the ¤ symbol in
the multifunction display go out.
Activating (AMG vehicles)
Press button :.
X
Indicator lamp ; lights up. If drive
program S or M is active, the automatic
transmission switches to drive program C.
If all conditions for automatic engine
switch-off (
¤ symbol is shown in green in the
multifunction display.
If not all conditions for automatic engine
switch-off (
¤ symbol is shown in yellow in the
multifunction display. If this is the case, the
ECO start/stop function is not available.
i
If indicator lamp ; is off, the ECO start/
stop function has been deactivated
manually or as the result of a malfunction.
The engine will then not be switched off
automatically when the vehicle stops.
I n f o r m a t i o n P r o v i d e d b y :
Driving
page 144) are fulfilled, the
Y
page 144) are fulfilled, the
Y
page 144) are fulfilled, the
Y
page 144) are fulfilled, the
Y
145
Z