License Plate Lamp; Replacement Bulbs; Electrical System; High Voltage Devices And Wiring - GMC 2011 Acadia Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Remove the two screws holding
each of the license plate lamps
to the liftgate trim.
2. Turn and pull the license plate
lamp forward through the lift gate
trim opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse steps 1 through 3 to
reinstall the license plate lamp.

Replacement Bulbs

Exterior Lamp
Number
License Plate Lamp
For replacement bulbs not listed
here, contact your dealer.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care

Electrical System

High Voltage Devices and
Wiring
Exposure to high voltage
can cause shock, burns, and
Bulb
even death. The high voltage
components in the vehicle can
only be serviced by technicians
194LL
with special training.
High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.
10-31
WARNING