Table of Contents
Advertisement
Changing the Menu Settings
Menus
[
DEMO MODE
Introduces special features of the
camera when there is no operation
for about 3 minutes during recording
mode.
( AUTO POWER OFF
If the camera is not operated for
5 minutes while the power is on,
it turns itself off automatically to
conserve power.
\
OPERATION SOUND
Turns on/off the operation sound.
RECORD BUTTON
Enables the recording button [REC]
on the LCD monitor.
`
QUICK RESTART
Enables the camera to start up
quickly when you turn off the camera
and then on again within 3 minutes
by closing and opening the LCD
monitor.
]
REMOTE
Turns on/off reception of the
operation signal from the remote
control.
_
AUTO FINALIZE
Sets the DVD to a readable state.
, FORMAT SD CARD
You have to format newly purchased
SD cards with this camera before
using them.
This will also ensure stable speeds
and operation when accessing the
SD card.
EN
Settings: [ ] = Factory-preset
OFF : Deactivates the function.
[ON] : Activates the function.
NOTE
•
The demonstration only works when the AC adapter is
connected, not with the battery pack.
•
If an SD card is in the camera, demonstration will not take
place even if this mode is set to [ON].
OFF : Disables the function.
[ON] : Activates the function.
To turn the camera on again, close the LCD monitor and
open it again when using the battery pack. When using the
AC adapter, perform any operation such as zooming.
OFF : Turns off the operation sound.
[ON] : The melody sounds when operations are performed.
OFF : Deactivates the function.
[ON] : Activates the function.
OFF : Deactivates the function.
[ON] : If the LCD monitor is opened again within 3 minutes,
the camera starts quickly. The power consumption used
for the 3 minute period after the LCD monitor is closed is
approximately 1/3 that used during recording. This enables
you to save more power than leaving the power on.
OFF : Does not receive the signal from the remote control.
[ON] : Enables operation with the remote control.
OFF : Makes created DVDs recordable (not playable on device
other than the camera).
[ON] : Finalizes created DVDs so that they can be played back
on DVD burner.
NOTE
•
When you play back a DVD created when [OFF] is set on
DVD burner, select [FINALIZE] on the DVD creation screen.
•
When you create two or more DVDs at the same time, other
than the last DVD is finalized automatically even if the setting
is [OFF].
[FILE] : Initializes all files in the SD card.
FILE + MANAGEMENT NO :
Initializes all files and management numbers in the SD
card.
NOTE
Be aware that all files and data including protected files will be
erased by the formatting process.
(Continued)
Advertisement
Table of Contents
