Table of Contents
Advertisement
Precautions
l.
Please read this manual thoroughly prior to installation and operation. Store this manual
properly for future reference. Consult your speed dome camera dealer if you have
uncertainties or questions.
2.
Make sure to use correct power supply indicated in the specifications. Wrong power supply
may cause improper performance, damage of the product, or fire. It is recommended that you
use the power supply that your speed dome dealer may provide.
3.
The High-Speed Dome Camera contains precision optical and electrical instruments. To avoid
possible damage caused by striking or shocking, please handle the unit carefully during
delivery, storage and installation.
4.
In the case of any unusual performance, unplug the unit and contact your dealer immediately
for help. Do not disassemble or remove any internal parts of the unit without professional help.
5.
To enswe optimal performance, make sure there is enough distance between video cable and
RM85 wires from the unit and any local high-voltage equipment or cables.
6.
Please do not install and use the unit in an environment with temperature or humidity that
o<ceeds the resfictive limits listed in the specifications.
7.
To avoid damage to camera's CCD, do not aim the camera at the sun or very bright object and
do not aim at bright object for a long time even when power is off.
8.
Do not use any strong chemical liquids when cleaning. If necessary, use neutral detergent and
water to clean the housing and lower bubble, and gently dry them offwith soft cotton fabric.
9.
Always install the unit in a place with enough holding force to avoid dropping the unit. The
required minimum holding force is five times of the total weight of the unit and the support.
10. Always use special optical lens paper or fabric to clean lens.
I I' Wear cotton gloves when handling dome bubble during installation or disassernble to avoid
bubble surface being scratched.
Advertisement
Table of Contents
