Bulb Replacement; High Intensity Discharge; (Hid) Lighting; Led Lighting - Cadillac 2013 Escalade Owner Manual M

10-30 Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 31.
For any bulb-changing procedure
not listed in this section, contact
your dealer.

High Intensity Discharge

(HID) Lighting

WARNING
The dipped beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
The vehicle may have HID
headlamps. After an HID headlamp
bulb has been replaced, you may
notice that the beam is a slightly
different shade than it was originally.
This is normal.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Back-Up Lamps

To replace this bulb:
1. Open the tailgate. See Tailgate
on page 2 8 for more
information.
2. Remove the two screws from the
taillamp assembly.
3. Pull the tail lamp assembly
rearward until the inner pins on
the tail lamp assembly
disengage from the vehicle.
4. Turn the socket anticlockwise to
remove it from the taillamp
assembly.
5. Pull the old bulb straight out
from the socket.