Panasonic KX-TDE100 Network Manual page 38

4.1.1 Assigning the IP Addressing Information
When not using a DHCP server:
a.
Click the LAN Setting tab, then select Disable
for the DHCP Client setting.
b.
For KX-TDE100/KX-TDE200, type the IP
address of the IPCMPR card in the IP Address
for IPCMPR Card box. For KX-TDE600, type the
IP address of the IPCEMPR card in the IP
Address for IPCEMPR Card box.
c.
In the IP Address for VoIP-DSP box, type the IP
address of the DSP16 or DSP64 card.
d.
In the Subnet Mask box, type the subnet mask
address of the network.
e.
In the Default Gateway box, type the IP address
of the default gateway.
f.
Click Apply.
3. a.
A screen will appear with information that any changes made in step 2 will be activated after the
PBX is restarted.
b.
Click OK to restart the PBX.
Notice
•
Do not change the IP addresses of the IPCMPR/IPCEMPR and DSP cards once IP telephones are
registered to the PBX using these IP addresses.
The IP telephones will not operate properly if these IP addresses are changed.
•
A DHCP server must be able to use a "client identifier" option specified by RFC 2131.
•
The PBX will not start properly if the IP addresses cannot be assigned automatically by the DHCP
server when DHCP Client is set to Enable. In this case, you need to consult your network administrator
because the DHCP server on your network may not be running or a network failure may have occurred.
If the DHCP server is not available, change the DHCP Client setting to Disable and set fixed IP
addresses, then restart the PBX.
To change the DHCP Client setting, connect the PC with an RS-232C cross cable or Ethernet straight
cable. When connecting the PC with an Ethernet straight cable, make sure the PBX is disconnected
from the LAN and then connect the PC with an Ethernet straight cable using 192.168.0.101 for the IP
address of the IPCMPR/IPCEMPR card.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*3 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*4 Valid IP address range: "1.0.0.0" to "223.255.255.255"
38 IP Networking Guide
*1
*2
*3
*4