Guitar Amp Classics - Steinberg UR28M Operation Manual

Guitar Amp Classics

Overview
Guitar Amp Classics are guitar amp effects that
make extensive use of advanced Yamaha modeling
technology. Four amp types with different sonic
characteristics are provided.
The maximum number of Channel Strip and Guitar
Amp Classics iterations which can be used
simultaneously has restrictions. Refer to the
"Limitations on the use of effects" (page 36).
How to Open the Window
From Dedicated Windows for Cubase Series
Select the "Guitar Amp Classics" from the "Effect
Type", then click "Channel Strip Edit" in the section
"Input Settings Window" (page 19).
From the dspMixFx UR28M
Select the "Guitar Amp Classics" from the "Effect
Type", then click "Channel Strip Edit" in the section
"Channel Area" (page 13).
Controls and Functions
CLEAN
This amp type is optimized for clean tones,
effectively simulating the tight brilliance of transistor
amplifiers. The tonal character of this amp model
provides an ideal platform for recording with multi-
effects. It also features built-in chorus and vibrato
effects.
VOLUME
Adjusts the amplifier's input level.
DISTORTION
Adjusts the depth of distortion produced.
TREBLE/MIDDLE/BASS
These three controls adjusts the amplifier's tonal
response in the high, middle, and low frequency
ranges.
Panel Controls for the Software Programs
PRESENCE
Can be adjusted to emphasize the high
frequencies and overtones.
Cho/OFF/Vib
Turns the Chorus or Vibrato effect on or off. Set to
[Cho] to turn the Chorus effect on, or to [Vib] to
turn the Vibrato effect on.
SPEED/DEPTH
These controls adjust the speed and depth of the
Vibrato effect when it is on.
The SPEED and DEPTH controls only work with
the Vibrato effect, and are disengaged when the
Cho/OFF/Vib control, above, is set to "Cho" or
"OFF."
BLEND
Adjusts the balance between the direct and effect
sound.
OUTPUT
Adjusts the final output level.
CRUNCH
This is the amp type to use when you want lightly
overdriven crunch tones. The CRUNCH model
simulates the type of vintage tube amplifiers that are
favored for blues, rock, soul, R&B, and similar styles.
Normal/Bright
Selects a normal or bright tonal character. The
[Bright] setting emphasizes the high-frequency
overtones.
GAIN
Adjusts the input level applied to the preamp
stage. Rotate clockwise to increase the amount of
overdrive produced.
TREBLE/MIDDLE/BASS
These three controls adjusts the amplifier's tonal
response in the high, middle, and low frequency ranges.
PRESENCE
Can be adjusted to emphasize the high
frequencies and overtones.
OUTPUT
Adjusts the final output level.
Operation Manual
UR28M
26