JVC LYT0002-088B Instructions Manual page 30

30
EN
Menus
The Recording Menu allows you to set these functions: Wide Mode, Zoom Magnification, Digital Image
Stabilizer, Gain Up, Fade/Wipe (
White Balance (
Stabilization and Gain Up .
LCD monitor
WIDE MODE
ZOOM
D I S
GA I N UP
TO FADER / W IPE MENU
TO P.AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU
W.BALANCE
I TEM –/+ BUTTON
END SET MENU BUTTON
Recoring Menu
WIDE MODE
ZOOM
D I S
GA I N UP
TO FADER / W IPE MENU
TO P.AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU
W.BALANCE
I TEM –/+ BUTTON
END SET MENU BUTTON
1 OPEN LCD MONITOR
First press PUSH-OPEN button and open the
LCD monitor fully.
• The LCD monitor turns on/off automatically
when it is opened/closed while the Power
Dial is set to "REC".
• The LCD monitor can be tilted upward up to
180 degrees and downward up to 90 degrees.
2
SELECT OPERATION MODE
Set the Power Dial to "REC" by pressing down
the lock button located on the dial and setting
the shooting mode selector to "MANUAL".
3 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in
the LCD monitor.
4 SELECT FUNCTION
Place the pointer next to the desired function
by pressing the –/+ button, then press MENU.
The pointer stops blinking, indicating that the
function has been selected.
pg. 38), P.AE/Effect (
pg. 44) . The following selection procedure applies to Wide Mode, Zoom Magnification,
O FF
20 X
OFF
AGC
AUTO
O FF
20 X
OFF
AGC
PUSH-OPEN
AUTO
RECORDING
pg. 42), Date/Time Menu, System Menu, and
MENU
5 SET FUNCTION PARAMETERS
Cycle the available settings of the selected
function by pressing the +/– button. Stop when
the one you need is displayed. Then press
MENU and the pointer automatically moves to
"END".
•To set the parameters for a different function,
repeat steps 4 and 5.
6 CLOSE RECORDING MENU
Press MENU. Selection is complete and the
menu disappears.
Advanced Features (Cont.)
Power Dial
AUTO
MANUAL
Shooting mode selector